Table of Contents
Advertisement
INSTALLATION
Thermodisc Installation:
14) Install the heat defl ector to the unit by fi tting the tabs into the tab
brackets located on the underside of the fi rebox. See diagram 11.
Diagram 12 shows defl ector completely installed.
Diagram 11
Diagram 12
Faceplate Installation:
15) Completely mount the faceplate to the unit. .See diagram 13.
Diagram 13
18
918-644b
Tab into Tab Bracket
Heat Defl ector
16) Secure the faceplate in place
using 2 screws on the left and
right side. Diagram 14 shows
mounting on right side.
Wiring:
17) Remove the wire harness from the valve. See diagram 15.
Wire Harness
18) Undo the wire clip to the right side of the valve. See diagram 16.
3
Diagram 14
Valve
Diagram 15
Diagram 16
Regency IG35 Gas Inbuilt Fireplace
IG35
06/23/08
Advertisement
Table of Contents
