LOG SET
INSTALLATION
Read the instructions below carefully and
refer to the diagrams. If logs are broken
do not use the unit until they are replaced.
Log kit #730-935 contains the following:
a) 02-65
Rear Log
b) 02-56
Middle Left Log
c) 02-44
Front Left Log
d) 02-46
Left Top Log
e) 02-45
Front Right Log
f) 02-47
Center Log
g) 02-48
Middle Right Log
h)
Embers
i)
Lava
Log kit #486-930 contains the following:
a) 02-50
Side Log
b) 02-52
Side Log
c)
Embers
d)
Lava
The "02" refer numbers (i.e. 02-65) are
molded into the rear of each log.
Installation of Kit 730-935:
1) Carefully remove the logs from the box and
unwrap them. The logs are fragile, handle
with care - do not force into position.
2) Sprinkle the embers on the front, left and
right sides of the firebox base.
Embers
Regency IG35 Gas Inbuilt Fireplace
3) Place Rear Log A)02-65 on the two pins on
the rear log support.
4) Place the Middle Left Log B)02-56 on the
902-151
two pins from the rear left side.
902-154
B)02-56
902-151
902-154
5) Place lava rock in front of middle left log as
shown in the picture.
6) Place Front Left Log C)02-44 onto the 2
front pins as shown.
Embers
A)02-65
C)02-44
INSTALLATION
7) Place the Left Top Log D)02-46 on the pin
on Log B)02-56 and on top of the cutout
on Log A)02-65.
D)02-46
B)02-56
C)02-44
8) Place Front Right Log E)02-45 on the two
pins as shown.
E)02-45
9) Place the lava rock in the area between
the left and right logs, leaving a space in
the middle for log (F) 02-47.
Ensure that the lava rocks are not placed
directly over the burner ports.
Lava Rock
A)02-65
13