Installing The Unit Directly In A Control Panel Using Screws; Installation Environment - Panasonic SF-C21 Instruction Manual

2-5-4 Installing the Unit Directly in a Control Panel Using Screws

The unit can be installed directly in a control panel by means of M4 pan head screws (length:
12mm or more) (purchase separately). The machine screws should be tightened with a torque
of 1.2N•m or less.
M4 pan head screws (length: 12mm or more)

2-5-5 Installation Environment

For the installation environment, refer to "8-1 Specifications."
Use the unit as per its specifications.
● Installation place: The unit is designed for use in a control panel.
● Ambient temperature: -10 to +55°C
● Ambient humidity: 30 to 85% RH (No dew condensation)
● Pollution degree: 2
● Overvoltage category: II or lower
● Usable altitude: 2,000m above sea level or lower
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Mounting hole finished size (Unit: mm)
37
Mounting
M4
19