Creating And Editing A Logic, And Saving A File And Transferring It To This; Device; Creating And Editing Logic; Saving A Logic File And Transferring It To This Device - Panasonic SF-C21 Instruction Manual

Creating and Editing a Logic, and Saving a File and Transferring it to this Device
5-9 Creating and Editing a Logic, and Saving a File and Transferring it to
this Device

5-9-1 Creating and Editing Logic

The following methods are available to create and edit logic.
■ Creating a new logic
A logic is created according to "5-7-1 Create New File".
■ Open and edit a logic according to Open sample logic
Sample logic is opened and edited according to "5-7-2 Open Sample Logic".
When a logic uses "Parallel muting," "Sequential muting," "Two-hand control," and "Input select,"
editing an applicable logic by opening it is easier than by creating a new logic.
■ Open a recent file and edit it
When a logic has already been created, open a recent file and edit it according to "5-7-3 Open
a Recent File".
■ Obtain a logic from this device and edit it
According to "5-7-4 Upload Logic from this Device", obtain the logic, which is being used in
this device, and edit it.

5-9-2 Saving a Logic File and Transferring it to this Device

■ Saving a logic in the PC
After a logic is created and edited, it is saved in the PC as a file according to "5-7-5 Saving a
File".
■ Transfer a logic to this device
After a logic is created and edited, it is transferred to this device according to "5-7-6 Download
Logic to Device".
© Panasonic Industrial Devices SUNX Co., Ltd. 2016 89