Example Of A Logic Using Control Block 1 / 2 - Panasonic SF-C21 Instruction Manual

5-10-2 Example of a Logic Using Control Block 1 / 2

Click control block 2 and open "Select control".
Click "AND".
Selected "AND" is set in control block 2.
● Click "C" of connection tab 1 to connect it
to C of input block 3. Click "D" to connect it
to D of input block 4.
● Click "A" of connection tab 2 to connect it
to A of input block 1. Click "B" to connect it
to B of input block 2.
● Click "F" of connection tab 4 to connect it
to F of connection tab 2.
● Click "E" of connection tab 5 to connect it
to E of connection tab 1.
The following logic is created.
● Output block 1 outputs the AND of input
blocks 1 and 2.
● Output block 2 outputs the AND of input
blocks 3 and 4.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Create a Logic
93