Panasonic SF-C21 Instruction Manual page 57

Step Status of indicators and switches
12
13
14
15
16
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Setting of Logics and OFF Delay Time
Rotating the rotary switch blinks the password selection indicator (orange).
Rotate the rotary switch further to return to Step 11.
Transition to "Select operation setting."
The logic No. currently set is displayed in the 7-segment indicator (red).
Logic selection indicator (orange) blinks.
" : Overall stop control" is set at factory.
Rotating the rotary switch proceeds to Step 14.
Pressing the rotary switch proceeds to Step 15.
Holding down the rotary switch proceeds to Step 21.
The currently set No. for OFF delay time is displayed in the 7-segment indi-
cator (red).
Delay selection indicator (orange) blinks.
" : 0 sec." is set at factory.
Rotating the rotary switch returns to Step 13.
Pressing the rotary switch proceeds to Step 18.
Holding down the rotary switch proceeds to Step 21.
Transition to "Set logic."
The logic No. currently set is displayed in the 7-segment indicator (red) and
blinks.
Rotate the rotary switch to select Logic No. from "
Logic No. 0 is customizable logic.
To use customizable logic, this device must be connected to a PC to make
settings by a software tool.
Refer to "Chapter 5 Software Tool."
If Logic No. 0 is selected, "Set OFF delay time" cannot be selected. OFF de-
lay time for Logic No. 0 is changed with a software tool.
Description
" to " ".
57