Panasonic SF-C21 Instruction Manual page 3

Thank you for purchasing Panasonic Industrial Devices SUNX's Safety Control Unit SF-C21.
Please read this instruction manual carefully and thoroughly for the correct and optimum use of
this device.
Kindly keep this manual in a convenient place for quick reference.
This device is a safety control unit for machines.
This manual is for the personnel who have undergone suitable training, have knowledge of
safety of machines and knowledge of electricity (are electric workers or have knowledge equiv-
alent to that of the workers), and
● who are responsible for the introduction of this device,
● who design the system using this device,
● who install and connect this device,
● who manage and operate a plant using this device, and
● who are qualified and responsible for each of the phases of design, manufacture, installation,
operation, maintenance or disposal.
Please fully understand "Safety Standards" introduced in this instruction manual and properly
handle the equipment with paying attention to the safety.
Notes
1) All the contents of this instruction manual are the copyright of the publishers, and may not
be reproduced (even extracts) in any form by any electronic or mechanical means (including
photocopying, recording, or information storage and retrieval) without permission in writing
from the publisher.
2) The contents of this instruction manual may be changed without prior notice for further im-
provement of the device.
3) Though we have carefully drawn up the contents of this instruction manual, if there are any
aspects that are not clear, or any error that you may notice, please contact our local Panaso-
nic Industrial Devices SUNX office of the nearest distributor.
4) English and Japanese are original instructions.
5) Windows is a registered trademark of U.S. Microsoft Corporation and other countries.
6) All other companies and product names are trademarks or registered trademarks of their re-
spective companies.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016 3