Daikin FVXS25FV1B Service Manual page 124

SiBE06-708
4.16.2 50 Class
H0
Remote
Controller
Display
Method of
Malfunction
Detection
Malfunction
Decision
Conditions
Supposed
Causes
Service Diagnosis
Fault condition is identified by the supply voltage and the DC voltage which is detected
before the compressor startup.
Fault condition is identified by compressor current which is detected right after the
compressor startup.
The detected valve of the supply voltage and the DC voltage is obviously low or high.
The compressor current doesn't run when the compressor is started.
Reactor disconnection
Compressor disconnection
Outdoor unit PCB defective
Compressor defective
Troubleshooting
113