Pause Function - Geemarc SCREENPHONE User Manual

>Replace
Go back
If you replace the original quick dial information will be overwritten.
If you go back you will get the option to choose another quick dial
location between 0 an 9.
Lettering on the Numerical Keypad
Key Characters Key Characters
1
2
3
4
5
Press each key the relevant number of times to get the letter you
need e..g. to get the letter J, press the 5 key once, to get the letter
S, press the 7 key four times in quick succession.
To move on to the next letter, wait a few seconds and the flashing
cursor will appear | after the last letter you entered. You may now
enter the next letter.

Pause Function

This function allows you to insert a pause within a telephone
number e.g. when you dial an international number, some
telephone systems will not identify the entire number entry without
a pause between the prefix digits and the number itself. When you
store a number e.g. 00-886-22-795-1234, you may have to dial 00,
Redial
then , then 886 and
digits. This allows adequate timing for the sequence of the phone
number to register with the telephone system and complete the
dialling successfully. When inserting a pause using Redial
"-" will be displayed.
PHONE BOOK
1 6
ABC2 7
DEF3 8
GHI4 9
JKL5 0
Redial
52
MNO6
PQRS7
TUV8
XYZ9
Space 0
again, and then the remaining