Installation; Connection/Setting Up - Geemarc SCREENPHONE User Manual

Connecting/Setting Up
Connect the handset cord. Insert one end of the cord into the
handset, the other into the telephone base – left side.
Open the battery compartment.
Insert 4 good quality alkaline batteries (AA size, 1.5V type, not
supplied) into the battery compartment located on the base of the
telephone.
Replace the battery cover.
Note: Do not use rechargeable batteries. Do not put batteries
into the household rubbish, pay attention to battery regulations
regarding battery disposal.
Insert the line cord into the socket located at the rear of telephone
.

INSTALLATION

then connect the plug at the the other end of the
cable into the wall socket
12