Table of Contents
Advertisement
About This Manual
Organization of This Manual
© National Instruments Corporation
The PCI E Series boards are high-performance multifunction analog,
digital, and timing I/O boards for PCI bus computers. Supported functions
include analog input, analog output, digital I/O, and timing I/O.
This manual describes the electrical and mechanical aspects of the
PCI-6023E, PCI-6024E, and PCI-6025E boards from the PCI E Series
product line and contains information concerning their operation and
programming.
The PCI-6023E/6024E/6025E User Manual is organized as follows:
•
Chapter 1, Introduction, describes the boards, lists what you need to
get started, gives unpacking instructions, and describes the optional
software and equipment.
•
Chapter 2,
Installation and
configure your board.
•
Chapter 3,
Hardware
functions on your board.
•
Chapter 4,
Signal
output signal connections to your board via the I/O connector.
•
Chapter 5, Calibration, discusses the calibration procedures for your
board.
•
Appendix A, Specifications, lists the specifications of the PCI-6023E,
PCI-6024E, and PCI-6025E boards.
•
Appendix B,
Custom Cabling and Optional
various cabling and connector options.
•
Appendix C,
Common
questions and their answers relating to usage and special features of
your board.
•
Appendix D,
Customer
request help from National Instruments or to comment on our products
and manuals.
•
The
Glossary
contains an alphabetical list and description of terms
used in this manual, including abbreviations, acronyms, metric
prefixes, mnemonics, and symbols.
Configuration, explains how to install and
Overview, presents an overview of the hardware
Connections, describes how to make input and
Questions, contains a list of commonly asked
Communication, contains forms you can use to
xi
Connectors, describes the
PCI-6023E/6024E/6025E User Manual
Hide quick links:
Advertisement
Table of Contents
