White Balance Setting [White Bal] - Panasonic GP-KH232CUE Operating Instructions Manual

[AWC MEMORY] Specifies the destination where AWC setting is saved.
The destination to save AWC that starts by holding down the [AWC [g]] button on the front face of
the CCU for 2 seconds or more is specified. The destination to save AWC is selected with use of
[e] or [f] button. The destination is selectable from among 1 (default), 2 and 3. When AWC is
started by holding down the [AWC [g]] button for 2 seconds or more at displaying an image, the
selected MEMORY number is displayed.
AWC-started screen
Note:
• If a different destination to save AWC is selected for each scene file, the white balance adjust-
ment is required for each scene file.

10. White balance setting [WHITE BAL]

Select a method of white balance adjustment from the following.
AWC (default): Activates the automatic white balance control mode.
This adjustment is suitable for a location where a light source is stable.
When "AWC" is selected, the operation to adjust the white balance is required.
ATW: Activates the automatic white balance tracking mode.
The camera constantly checks and automatically adjusts the white balance.
If the situation meets one of the following or other, color may not be accurately reproduced. In
this case, perform "AWC" to adjust the white balance.
• The subject is mostly highly-colored.
• The photographic atmosphere is under the bright blue sky or at nightfall.
• The illumination of the light illuminating the subject is low or too high.
MANU: Manually adjusts the white balance.
When "AWC" is selected, follow the steps below to adjust the white balance.
Step 1
Aim the camera at a white subject.
AWC
MEMORY1
Step 2
Hold down the [AWC [g]] button on the front
face of the CCU for 2 seconds or more.
AWC starts. The adjustment is completed
when the destination and "AWC OK"
appear.
33