Panasonic GP-KH232CUE Operating Instructions Manual page 27

[DTL MODE] Specifies the details.
The band and level of the edge correction are specified.
"SCENE FILE" screen
** SCENE FILE 1 ** P1
LABEL: ................
DTL MODE
RED DTL
GAMMA
KNEE
BLACK STRETCH
D-RANGE
WHITE CLIP
RET END
Step 1
Move the cursor to "DTL MODE" of the
"SCENE FILE" screen and press the [SEL] but-
ton.
The "DTL MODE" screen appears.
Step 2
Move the cursor to "PATTERN", select a pat-
tern from among "1", "2" and "3" and press
the [SEL] button.
The setting contents of "DTL BAND" and
"DTL LEVEL" are applied to "USER".
The band and level can be manually adjusted
in "USER". Perform adjustment on an as
needed basis. Be sure to view a monitor when
the adjustment is performed.
Note:
• The band and level can also be adjusted
directly without applying any of the pat-
terns, "1", "2" and "3" to "USER".
Step 3
Move the cursor to "DTL BAND" and use the
[e] or [f] button to select the band of the
edge enhancement.
When the level indicator moves in the "+"
direction, the edge becomes thinner (the band
becomes higher). When the level indicator
moves in the "–" direction, the edge becomes
thicker (the band becomes lower).
*MANU
OFF
.... .... 45
|
*MANU
OFF
NORMAL
........
109
|
"DTL MODE" screen
** DTL MODE **
PATTERN USER
. . . .
DTL BAND
−
....
DTL LEVEL
−
RET END
Step 4
Move the cursor to "DTL LEVEL" and use the
[e] or [f] button to select the level of the
edge enhancement.
When the level indicator moves in the "+"
direction, the image becomes sharper, and
when the level indicator moves in the "–" direc-
tion, the image becomes softer.
Note:
• Jaggies may appear on the edge of a
photographic subject, but this phenome-
non is not abnormal. If this phenomenon
is not favorable, decrease "DTL BAND" or
"DTL LEVEL" to adjust the image quality.
4
|
+
.... 16
|
+
27