Panasonic GP-KH232CUE Operating Instructions Manual page 31

Step 1
Point the camera at the center of the subject
with which the color is detected.
If the camera is immovable, move the rectan-
gle cursor to the area with the target color by
pressing the [g], [h], [e] and [f] buttons.
Note:
• Every time the [SEL] button is pressed,
the size of the rectangle cursor changes in
the order of large
Select a size to meet the subject size.
Step 2
Hold down the [FREEZE MENU ] button for 2
seconds or more.
The "MATRIX" screen appears again.
[CHROMA GAIN] Adjusts chroma gain.
Be sure to view a vector scope or a color video monitor when the chroma gain is adjusted by
pressing the [e] or [f] button. When the level indicator moves in the "+" direction, the color
becomes deeper, and when the level indicator moves in the "-" direction, the color becomes lighter.
[TOTAL PED] Adjusts the pedestal level.
Be sure to view a waveform monitor or a color video monitor when the pedestal level (black signal
level) is adjusted by pressing the [e] or [f] button.
When the level indicator moves in the "+" direction, the image becomes brighter, and when the level
indicator moves in the "–" direction, the image becomes darker.
medium small.
Step 3
To perform fine adjustment, adjust "PHASE"
(hue) and "GAIN" (chroma).
For example, the adjustment of "PHASE" or
"GAIN" of "A13/14" on the following screen
provides the simultaneous adjustment of
"PHASE" or "GAIN" of the adjacent axes "13"
and "14" in the color matrix splitting chart
above.
** MATRIX **
A13/14 PHASE ....
AXIS13 PHASE ....
AXIS14 PHASE ....
A13/14 GAIN
AXIS13 GAIN ....
AXIS14 GAIN ....
USER AREA *
RET END
Note:
• When the color on the axis in the color
matrix splitting chart is detected, the adja-
cent axes are not displayed.
USER
....
0
|
....
| 0
....
0
|
.... ....
| 0
....
0
|
....
| 0
31