Panasonic GP-KH232CUE Operating Instructions Manual page 20

Top screen of SETUP menu
Step 1
Hold down the [FREEZE MENU ] button for 2
seconds or more.
The top screen of the SETUP menu
appears.
Step 2
The SETUP menu consists of 3 pages of con-
tents.
To turn a page, move the cursor to "P1" or
"P2", "P3" and press the [e] or [f] button.
Note:
• The cursor is a blinking part.
The corresponding part is shaded on each
screenshot in this document.
Step 3
Perform the settings for each item.
Selection of setting item: Press the [g] but-
ton or [h] button to move the cursor.
Change of settings: Press the [e] button or
[f] button.
Display of advanced setup screen: Press
the [SEL] button when "*" is attached to
the target item.
Return to previous setup screen: Move the
cursor to "RET" and press the [SEL] but-
ton.
Step 4
To return to the camera image screen after
saving the setting contents, move the cursor
to "END" and press the [SEL] button. The set-
ting contents can be saved even if the power
of the CCU is turned off.
20