Panasonic GP-KH232CUE Operating Instructions Manual page 29

[BLACK STRETCH] Toggles the black stretch function on and off.
Selection of "ON" or "OFF" (default) determines whether or not to perform the black stretch func-
tion. When "ON" is selected, black crushing is corrected at low illuminance to make an image more
viewable.
Important:
• When "D-RANGE" is set to "EXPAND", the knee point adjustment is disabled.
[D-RANGE] Toggles the dynamic range between NORMAL and EXPAND.
The dynamic range is set to "NORMAL" (default) or "EXPAND".
Selection of "EXPAND" makes contrasty images more viewable.
When "EXPAND" is selected, follow the steps below to adjust the dynamic range expansion level.
"D-RANGE LEVEL" screen
** D-RANGE LEVEL **
........
D-RANGE
−
RET END
Step 1
Select "EXPAND", and then press the [SEL]
button.
The "D-RANGE LEVEL" screen appears.
[WHITE CLIP] Adjusts the white clip level.
Be sure to view a waveform monitor or a color video monitor when the white clip level is adjusted
by pressing the [e] or [f] button. When the level indicator moves in the "+" direction, the level
becomes higher, and when the level indicator moves in the "–" direction, the level becomes lower.
Important:
• When "D-RANGE" is set to "EXPAND", the knee point adjustment is disabled.
[FLARE COMP] Performs flare compensation.
Selection of "ON" or "OFF" (default) determines whether or not to perform the flare compensation.
When "ON" is selected, flare is reduced.
[DNR] Selects the level of the digital noise reduction function.
The digital noise reduction function reduces noise. The level is selectable from the following:
LOW (default): The low level of digital noise reduction is performed. (small residual image)
HIGH: The high level of digital noise reduction is performed. (large residual image)
OFF: The digital noise reduction function is disabled.
240
|
+
Press the [e] or [f] button to adjust the
dynamic range expansion level.
Step 2
29