Recording Programmes - Teac HDRM7250 User Manual

Table of Contents

RECORDING PROGRAMMES

To record a programme, press the desired channel number.

Press

key to display the

recording options. There are two options available: -

Red key = manual recording

Green key = automatic recording

Selecting manual will start a recording from the current time. The duration will be preset to 3 hours

later.

Selecting automatic will record the current program. The duration of recording is subject to the

accuracy of the information from the broadcaster.

You may record a 2

program as follows: -

Change channel by pressing

and then select the

key. Then press either the

red

(manual) or

green (automatic) to record. Whilst a 2

recording is made, you can no longer

change channels.

You can however press

and select MY RECORDINGS to watch a

program that was previously recorded.

To STOP a recording, you must select the channel you wish to stop and press

again and the

following will appear.

Now press

red to STOP the recording.

Alternatively, to stop a recording, you can press

and enter the RECORDING TIMERS menu.

The

yellow key is used to stop a recording.

Table of Contents