Connecting An Ip Phone; Connecting Sip Stations; Connecting Cards To Lan - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL
CONNECTING TO 8COMBO/8COMBO2
Connect a digital phone to the 8COMBO/8COMBO2 board by using a twisted pair of AWG #24 or
AWG #26 wires.
D1-D8 Port
Pin No.
Function

7.1.4 Connecting an IP Phone

Refer to the ITP-5121D Keyset User Guide, ITP-5112L Keyset User Guide, ITP-5107S Keyset User
Guide, SMT-i3105 User Guide, SMT-5210 User Guide, SMT-i5220 User Guide, SMT-i5230 User
Guide, and SMT-i5243 User Guide for information on connecting keysets.
CAUTION: The input power of the SMT-i Series phones needs 5.0vDC and 3000mA. The SMT-i5210, SMT-
i5220, SMT-i5230, and SMT-i5243 need to be powered by using Samsung's SMT-A53PW power adapter.
The SMT-i3105 requires the SMT-A53PA power adapter. Failure to use the appropriate power supply will
cause permanent damage to the phone and will void Samsung's warranty.

7.1.5 Connecting SIP Stations

There is no physical SIP station card required to use the SIP station service. In order to use a
generic (non-Samsung) SIP device (phone, softphone, terminal adapter), the OfficeServ
system must be IP-enabled. This means the OfficeServ system must have a SIP Stack License
key, MGI channels virtual ports, MGI channels, with the latest software MP20S software, and
have a high speed internet connection. Please refer to the "OfficeServ Series SIP Station Quick
Reference Document" for more information about configuring the OfficeServ SIP Server.

7.1.6 Connecting Cards to LAN

PLIM/PLIM2/GPLIMT/OAS/MP20S cards can be connected to a LAN by using an Ethernet
cable.
Pin No.
MP20S/OAS
PLIM/PLIM2
GSIMT/GPLIMT
1 2 3
- - - DLI TIP
Figure 7.6 RJ-45 Port of the 8COMBO/8COMBO2 (For Digital Phone)
1 2 3
Tx+ Tx- Rx+
Rx+ Rx- Tx+
Figure 7.7 LAN Connections
7.4
D1~D8 Port
(RJ-45)
4 5 6
DLI RING -
RJ-45 port
4 5 6
- - Rx-
- - Tx-
Home Page
INSTALLATION
PART 7 JULY 2010
7 8
- -
7 8
- -
- -