Slot Information; Cnf24 Setup - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL

SLOT INFORMATION

If the CNF24 card is installed on a slot that supports more than 24 channels, all 24
conference channels are used. If installed on a 16 channel slot, only 16 conference
channels are supported.

CNF24 SETUP

To setup the CNF24 card follow the steps below:
1. Install the CNF24 card on the system.
2. Connect network cable with CNF24. The CNF24 card can be installed normally without
being connected with a networking cable but conference services will not be
operational.
3. The RUN LED will blink when the CNF24 card is ready to provide conference service.
User can check the CNF24 software version and CPLD/PCB version in Device Manager
2.2.0.
4. Enter the CNF24 IP address in Device Manager 2.2.16 or in MMC 871. The CNF24 card
will restart automatically to apply the new network settings.
16
MP20S 16
24
24 24
Figure 3.39 CNF24 Slot Information
Figure 3.40 CNF24 Parameter Settings
3.4
Home Page
INSTALLATION
PART 3 JANUARY 2011