Connecting A Wireless Lan Access Point - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL

7.1.10 Connecting a Wireless LAN Access Point

Wireless LAN service offered by the OfficeServ 7200-S system requires the following
equipment:
1. SMT-R2000: Wireless LAN Access Point (AP)
2. SMT-W5100E/SMT-W5120D: Wireless LAN IP Phone
Maximum Number of Users
Number of Simultaneous Users
REFERENCES: For information on how to install and use SMT-R2000 and SMT-W5100E,
refer to Wireless Documentation.
Connect 4SWM board and SMT-R2000 WAN port by using RJ-45 Ethernet cable (100m
maximum distance). SMT-R2000 does need to connect to additional power because it can get
power through 4SWM which supports (no PoE).
Table 7.2 Specification for Wireless LAN Connection
Item
7.25
INSTALLATION
PART 7 MAY 2010
OfficeServ 7200-S
64
MMC 845 Setting
Home Page