Samsung OfficeServ 7100 Installation Manual page 88

OfficeServ 7100
TECHNICAL MANUAL
MMC
Select music sources for C.O. lines in MMC 408 and music sources for extensions in
MMC 308. For detailed instructions on the MMC programs,
Programming Manual.
The following ports are assigned to the external MOH inputs on the MIS daughtercard:
HARDWARE
ITEM
MOH/BGM Ext. Source
7.2.2 Connecting External/Additional Page Equipment
Instead of an internal speaker, external broadcasting equipment, such as amps or speakers,
and additional equipment that can broadcast page ring) signals outside a building can be
connected to the OfficeServ 7100 system.
Connect external/additional paging equipment to the MP10/MP10a MISC port. The power of
the external/additional paging equipment should be connected separately.
The MP10/MP10a MISC port provides a voice pair and a one dry contact to be used with
customer-provided paging equipment. Connect the customer-provided paging equipment to
the page output pins of the MISC port
The Page Zone Relay ports assigned to the dry contact pair are listed in the following table.
Assign the DN number to the selected page zone using Default DN (Ports).
HARDWARE
ITEM
Page Tip & Ring (600 ohms)
Contact Pair #1
Contact Pair #2
• MISC port is located on the front panel of the MP10/MP10a.
MISC
FUNCTION # in MMC 724
01
(see Figure 7.22).
MISC
FUNCTION # in MMC 724
02
03
04
7.24
Home Page Table of Contents
INSTALLATION
PART 7 MAY 2010
refer to OfficeServ 7100
DEFAULT
DN (Ports)
371
DEFAULT
DN (Ports)
361
362
363