Table 3.13 Oas Front Panel Components - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100
TECHNICAL MANUAL
Ports & LEDs
LAN
SIO
RST
PWR LED
RUN LED
LAN Tx LED
LAN Rx LED
SVC1 LED
SVC2 LED
SVC3 LED
Figure 3.33 Front View of the OAS Card

Table 3.13 OAS Front Panel Components

Function Description
Port that connects the Ethernet.
Serial Port (for Samsung Use ONLY)
Button for resetting the OAS.
This LED indicates the power supply status.
- Off: Power is not being supplied.
- On: Power is being supplied properly.
This LED indicates MP40 status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates the transmit status of the LAN port.
- Off: Data is not being transmitted.
- On or blink: Data is being transmitted.
This LED indicates the receive status of the LAN port.
- Off: Data is not being received.
- On or blink: Data is being received.
This LED indicates if the MOBEX DSP service is being offered.
- This LED blinks when program is being modified or configuration is being
loaded.
This LED indicates if the LAN connection is alive.
- This LED blinks when program is being modified or configuration is being
loaded.
This LED indicates if the MPS channel service is being offered.
- This LED blinks when program is being modified or configuration is being
loaded.
3.35
Home Page Table of Contents
INSTALLATION
PART 3 MAY 2010