Officeserv - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100

TECHNICAL MANUAL
3) With a hammer, drive plastic anchors into the drilled holes.
4) Align the screw holes of the wall mount bracket to the position that the plastic anchors are
driven. Insert screws to each hole and tighten the screws with a Phillips screw driver.
5) Two screws exist in the two screw holes among the four screw holes on the bottom side of the
OfficeServ 7100 cabinet. Unscrew the two screws to a height of about 2mm.
Figure 2.15 Installation on a Wall (3)
Figure 2.16 Installation on a Wall (4)
2 m
Figure 2.17 Installation on a Wall (5)
2.10
Home Page Table of Contents
INSTALLATION
PART 2 MAY 2010