Table 3.3B Ports And Leds Of The Mp10A - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100
TECHNICAL MANUAL
Ports & LEDs
MC LED
3.2.4b MP10a LEDs
The front view of the MP10a card is shown in the picture below.
The MP10a front panel components have the functions below:
Ports & LEDs
P1~P4 Ports
MISC Port
Media Card
LAN Port
SIO Port
RST Button
Function Description
This LED indicates the status of the MP10 MMC+/SD card access.
- Off: The MP10 MMC+/SD card is not installed.
- On: The MP10 MMC+/SD card is installed, however, is not being
accessed.
- Blink: The MP10 MMC+/SD card is installed and is being accessed.
Figure 3.7b Front View of the MP10a

Table 3.3b Ports and LEDs of the MP10a

Function Description
Connection ports for the 4DLM or 4SWM daughtercards when installed
on the MP10a.
Port that connects external MOH/BGM sources, paging device, loud bell
or common bell.
Slot for installing the MP10a SD media storage card. This card contains
the main system software, system configuration database, and
voicemail greetings and messages.
Port for establishing the 10 Base-T/100 Base-Tx Ethernet connection.
This allows the MP10a to be connected to a data network.
Serial port (Samsung use ONLY).
Button for resetting the MP10a card.
3.10
Home Page Table of Contents
INSTALLATION
PART 3 MAY 2010