Samsung OfficeServ 7100 Installation Manual page 14

OfficeServ 7100
TECHNICAL MANUAL
2.4.2 Wall Installation
CAUTION: Only mount OfficeServ 7100 onto a wall capable of supporting the 7100
cabinet, associated blocks, cables and peripheral equipment.
1) Turn the 7100 cabinet onto its bottom side. Using the four short screws, install the two wall
mount brackets to the bottom of the cabinet. The wall mount brackets must be correctly
installed onto the cabinet with the star shaped holes angled out away from the cabinet as
shown below.
TOP
2) Using the four (shorter) screws screw both wall mount brackets in the proper direction
securely onto the bottom of the cabinet.
Correct
Figure 2.6 7100 Cabinet Side View—Bracket Angle Out
Figure 2.7 7100 Cabinet with Brackets
2.5
Home Page Table of Contents
INSTALLATION
PART 2 MAY 2010
BOTTOM
Incorrect