Napoleon GVF40N Installation And Operation Instructions Manual page 9

BRICK PANEL INSTALLATION
Install the base panels as illustrated in steps 1-4 . The
side panel sits under the bracket tab
panel in position, bend down the tab to secure. [DETAIL 5.]
RETAINER
DETAIL 5
Combustible materials may be installed flush with the front
.
Holding the side of the fireplace but must not cover any of the black face-
areas of the fireplace. Non-combustible material (brick,
stone or ceramic tile) may protrude in these areas.
FIGURES 9a-e
It is not necessary to install a hearth extension with this
fireplace system.
When roughing in the fireplace, raise the fireplace to ac-
commodate for the thickness of the finished floor materi-
als, i.e. tile, carpeting, hard wood, which if not planned for
will interfere with the opening of the lower access door and
STEP 1
the installation of many decorative flashing accessories.
Objects placed in front of the fireplace should be
kept a minimum of 48" away from the glass front
faces of the fireplace.
FIGURE 10
STEP 2
DRYWALL
STEP 3
4" MIN
STEP 4
Refer to pages 13-15 for complete instructions regarding
mantle requirements and installations, log placement,
glass door and upper and lower louvre attachments.
STEP 5
FACING
FINISHING
W415-0319 / D / 08.03.05
9
DRYWALL