Power Connector Cable - HP Spectre x360 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the display assembly (see
Remove the power connector cable:
1. Release the power connector cable (1) from the retention clips built into the computer.
2. Remove the power connector cable from the computer (2).
Reverse this procedure to install the power connector cable.
Bottom cover on page
Battery on page 22).
Display assembly on page
21).
33).
Spare part number
841237-001
Power connector cable 35