Fan - HP Spectre x360 Maintenance And Service Manual

Fan

NOTE: The heat sink spare part kit includes replacement thermal material.
Description
Fan
Before removing the fan, follow fan these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the fan:
1. Disconnect the fan cable from the system board (1).
2. Remove the three Phillips PM2.0×4.5 screws (2) that secure the fan to the computer.
3. Remove the fan (3) from the computer.
Reverse this procedure to install the fan.
32 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 22).
System board on page
21).
37).
Spare part number
841263-001