Cleaning Exhaust Gas Collector - RIKA PREMIO Instruction Manual

➧ Refit the parts you removed in the
reverse order.
Fig 4
Cleaning the flues
Fig 5
Fig 6
CLEANING THE FLUE MANIFOLD
The heating flue is located in the bottom of
the combustion chamber (Fig. 7 to Fig. 10)
➧ After removing the front panels (see
page 15, remove cast
dismantle front panel, Fig. 6, 47)
➧ Open the grate door
➧ Dismantle the bottom
opening Fig. 5, 33 (four wing nuts)
➧
➧
➧
Fig 7
Fig 8
cover and
Fig 9
inspection
25
Clean the inserted intermediate floor
(Fig. 5, Part 33) (e.g. with vacuum cleaner)
and then remove from combustion
chamber
Now vacuum the combustion residue
from the manifold channel.
Fit the parts in the reverse order again.
Attention must be paid to a tight fit.