RIKA PREMIO Instruction Manual page 18

On selecting the "MENU" key the display
shows the following weekday:
TU
"TU" = Tuesday,
Press the "ENTER" key to return to the
starting point of the first heating time for
Tuesday.
Proceed to enter the rest of the heating
times for the weekdays (Wednesday "WE",
Thursday "TH", Friday "FR", Saturday "SA",
Sunday "SU" as described above.
After acknowledgement with "ENTER" of
the E2 value of Sunday (SU) and selection
of "MENU" the display shows:
"PS" (Power Start) = heating
PS
output during the programmed
75
heating times (S1-E2, S2-E2).
The number corresponds to the heating
output in percent (0% equals minimum
heating output, 100% equals maximum
heating output).
By pressing the "+" or "-" keys you can
change the value of the heating output in
5% steps as required. The value is confir-
med with "ENTER" and the display shows
"PE" (Power End) = heating
PE
output between the programmed
OFF
heating times (E1-S2).
"OFF" indicates that the stove is switched
off between the programmed heating
times.
The value "OFF" is achieved by pressing the
"-" key until "OFF" is displayed.
If you want to maintain a specific heating
output (low operation) between the pro-
grammed heating times you can set the
required value by pressing the "+" or "-"
keys.
The number equals the heating
PE
output
5
window 5%).
Press the "ENTER" key to save the PE value,
the display shows:
"CL" = Clean
CL
the number indicates the time
60
interval in minutes (e.g. see
window 60 Minutes).
By pressing the "+" or "-" keys you can
determine the desired time interval in 5
minute steps (The cleaning interval can be
extended to 300 minutes, however we
recommend a cleaning cycle of 60 minu-
tes). Confirm with "ENTER" and the display
shows:
This is the current software
VA
version of the control and is used
for customer service reasons
1.22
(display only).
Now use "MENU" to access the internal
clock and the following display appears:
"H" = Hour
H
the number indicates the hour
13
(value range 0 to 23).
18
in percent (e.g. see