Shut Down Unit From Automatic Operation; Automatic Stop Controlled By Heating Time; Automatic Stop, Manual; Shut Down By Operating Mode In Standby - RIKA PREMIO Instruction Manual

On completion of the switch off program
the display goes off. When the "ON/OFF
key is pressed a re-start follows.
SWITCHING OFF STOVE AUTOMATIC
OPERATION
Heating time controlled automatic stop
If during automatic operation the "PE" out-
put is switched to OFF, then the stove will
be switched off at the end of a heating time
as per the above-described functions.
The difference to manual switch off is that
TM is displayed instead of ON.
On completion of the switch off process
the following is displayed:
TM "TM" = Automatic operation
(Time mode)
OFF
OFF switches off heating operation.
A pre-programmed heating time re-sets
the stove automatically in operation and
the user can manually change to the ON
mode (e.g. if currently a heating require-
ment outside the programmed heating
times is required).
Manual automatic stop
If during automatic operation
"ON/OFF" key is pressed the stove goes
immediately into switch off operation. The
same indication as described previously is
displayed. On completion of the exit pro-
gram the display switches off and the stove
can be re-switched to automatic mode by
pressing the "ON/OFF" key.
SWITCHING OFF BY CHANGING OPE-
RATING MODE IN STANDBY
If you change to the Standby mode by pres-
sing the "ENTER" key in "Manual opera-
tion" and in automatic operation, then
switching off as described in the process
above will be carried out. On completion
of the switching off program the following
display appears:
SB
To re-start the stove a corresponding mode
must be selected or the stove must be star-
ted with the optional Tele-Control (tele-
phone start).
PELLET CONTROL (OPTIONAL) ROOM
TEMPERATURE SENSOR
Using the external operating unit your pel-
let stove functionality can be extended by
the room temperature control. This means
that the room temperature is measured by
a sensor in the external operating unit.
The function is not part of the standard
delivery and can be retro-fitted if desired.
The corresponding extended functions of
the stove and the programming of the
system values are contained in the retro-fit-
the
ting instructions.
TELE_CONTROL (TELEPHONE CON-
TROL OPTIONAL)
The function is not part of the standard
delivery and can be retro-fitted if desired.
The corresponding extended functions of
the stove and the programming of the
system values are contained in the retro-fit-
ting instructions.
22
"SB" = Standby