File Sequence No.: File Numbering Options; Date Settings: Setting The Camera Clock; Language/N: Choosing A Language - Ricoh G800 User Manual

File Sequence No.
When you switch SD memory cards, you can set your camera to continue
consecutive numbering from the previously loaded card.
Available Settings Description
On (Continue
numbering)
Off (Do not
continue
numbering)
Note ----------------------------------------------------------------------------------
• The selected option also applies to files in internal memory.
• When images are transferred to a computer using DL-10 (GP.179), the file being
transferred is renamed and saved.
Caution ------------------------------------------------------------------------------
When the file name reaches RIMG9999 or R9999999, no more files can be saved.
9 In this case, move image data from the SD memory card to the memory of the
computer or a storage medium, and then format the SD memory card.
Date Settings
Set the camera clock.
Note ----------------------------------------------------------------------------------
• If the battery is removed for more than three days, the date and time settings
will be lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining
power for more than ten hours.
Language/N
Choose the language used in camera displays. The default setting varies with the
country of purchase.
100
Files names consist of "R" followed by a seven-digit number (e.g.,
"R0010001.jpg"), assigned in ascending order from 0010001 to
9999999. When a new memory card is inserted, file numbering
continues from the last number used.
File numbering is assigned, from RIMG0001.jpg to RIMG9999.
jpg, for each SD memory card. When the file name reaches
RIMG9999, no more data can be recorded to that card.
GP.32
GP.31