Setting The Language, Date And Time - Ricoh G800 User Manual

Note -------------------------------------------------------------------------------------
• If you adjust the clock before turning the camera off, the camera will display the
number of shots taken since the clock was set.
• A zero is displayed if the clock is not set.
Using the Camera in Playback Mode
Pressing and holding the 6 (Playback)
button turns on the camera in playback
mode, allowing you to start playback at once.
When the camera has been turned on with
the 6 button, pressing the 6 button again
switches playback mode to shooting mode.
About Auto Power Off --------------------------------------------------------------
• If the camera goes unused for a set period of time, it automatically turns itself
off to save power (Auto Power Off ).
• The auto power off setting can be changed (GP.98).
Password Protection ----------------------------------------------------------------
If the camera is password protected using any of the [Camera User Lock Options]
(G P.110), [Camera Admin. Lock Options] (G P.110), and [Set/Edit SD Card PW]
(GP.112) items in the setup menu (G P.95), you may be prompted for a password
when the camera is turned on. To use the camera, enter the password as
described on P.110.

Setting the Language, Date and Time

When the power is turned on for the first time, the language setting
screen appears (for the picture display language). After setting the
language, go on to the date/time setting (for printing the date and
time on your photos).
31