Maximizing The Picture Display Brightness - Ricoh G800 User Manual

Note -------------------------------------------------------------------------------------
• When [Shooting Info. Display Frame] is set to [On] in the setup menu, the
shooting information display frame can be displayed for normal symbol display
and histogram display (GP.99).
• Histograms are not displayed in movie mode. A blinking [O] icon, the
recording time, and the time available are displayed during recording even
when indicators are hidden or the grid guide is displayed.
• When [Level Setting] is set to [Level + Shift] or [Level] (G P.48), the level
indicator is displayed during normal symbol display and histogram display
(GP.49).
• When the picture display is off (including when the display has turned off
automatically in synchro-monitor mode), pressing any of the following buttons
turns the picture display on: the MENU/OK, ADJ./MEMO, DISP., 8, 9, 6
(Playback).
During Playback Mode
Normal Symbol Display
000-0001 000-0001 000-0001 0001 / 9999 0001 / 9999 0001 / 9999
2014/09/01 00:00 2014/09/01 00:00 2014/09/01 00:00 F3.5 F3.5 F3.5 1/1000 1/1000 1/1000
Image Clip
(if present)

Maximizing the Picture Display Brightness

Hold the DISP. button down in shooting mode to maximize the display
brightness in shooting mode. When the brightness is at the maximum
setting, holding the DISP. button down returns the brightness to the
level set in [LCD Brightness] (GP.97).
Histogram and Detailed
Information Display
4:3 N 4:3 N 4:3 N
000-0001 000-0001 000-0001 0001 / 9999 0001 / 9999 0001 / 9999
2014/09/01 00:00 2014/09/01 00:00 2014/09/01 00:00
No Display
4:3 N 4:3 N 4:3 N
Client Client Company A Company A
Const.type Const.type Foundation work Foundation work
Location Location Exterior Exterior
Supervisor Supervisor Beverly Beech Beverly Beech
Affiliates Affiliates Gamma Company Gamma Company
Camera Memo
(if present)
47