Barcode Mode: Choosing A Destination For Barcode Data; Scan Time: Choosing A Barcode Scan Time; Image Clip: Append Image Clips - Ricoh G800 User Manual

Barcode Mode
Choose where barcode data are stored.
Available Settings Description
Mode1 The barcode is stored in the memo list as a temporary
description for the first item. This description is overwritten each
time a barcode is read.
Mode2 The first barcode read is stored in the memo list as a temporary
description for the first item, the second barcode as a
temporary description for the second item, the third barcode
as a temporary description for the third item, and the fourth
barcode as a temporary description for the fourth item. These
descriptions are overwritten in turn as new barcodes are read.
Mode3 This option only takes effect in shooting mode. Up to fifty
barcodes can be stored in the memo list as temporary
descriptions for the first item. These data can be viewed in the
camera memo dialog before shooting but can not be changed
and are deleted after a picture is taken.
Mode4 The first barcode read is stored in the memo list as the name of
the first item and the second barcode as the name of the second
item. All subsequent barcodes overwrite the name of the first
item. These names are stored until the camera is turned off.
Mode5 The first barcode read is stored in the memo list as the name of
the first item and the second barcode as the name of the second
item. All subsequent barcodes overwrite the name of the second
item. These names are stored until the camera is turned off.
Mode6 A QR code listing item names and descriptions is stored in the
memo list as a temporary memo.
Scan Time
Choose the maximum time the camera will wait for a barcode to be scanned.
Scanning will be interrupted if a barcode is not read in the specified time.
Note ----------------------------------------------------------------------------------
If [27 seconds] or [30 seconds] are selected when a BR-1 barcode reader
(available separately) is connected, the scan delay will be set to 25.5 seconds.
Image Clip
Select [On] to append image clips to pictures.
Note ----------------------------------------------------------------------------------
The self-timer can not be used when image clip is on (G "Software User Guide"
P. 41).
"Software User Guide" GP.36
"Software User Guide" GP.41
10
117