Ricoh G800 User Manual page 186

Wireless LAN related error messages
Communication and send setting errors
Error Message
Connection error
Send method must be
selected
Cannot connect to access
point
The IP address is already
in use
Conflicting LAN setting
Destination not registered The communication list has not been imported by the camera.
Invalid key size.
Cannot find access point.
Connection information
not available.
Cause and Solution
The camera is unable to establish a connection for some reason.
Check the communication settings.
The [Send Method] setting is not selected in the communication
settings. Select [Send via FTP].
The destination access point is off or otherwise not operating. Check
the access point.
Incorrect communication settings. Check the send settings.
The same IP address as the camera exists in the destination
network. Check the [IP address] in the Detailed Setups [Networks]
tab.
The first destination sent to after turning the camera on and the
setting in the Detailed Settings [Network] tab or [Wireless LAN] tab
is different. To send to a destination different from the setting in the
[Network] or [Wireless LAN] tab, change the destination in advance
and restart the camera.
Import the communication list into the camera and try again.
If you have changed the option selected for [Crypt/Authentication]
in the [Wireless LAN] tab, check the [Network Key].
• If [WEP/OPEN] or [WEP/SHARED] is selected, enter a key of from 5
to 13 characters ([String]) or 10 to 25 characters ([Hex]).
• If [AES/WPA-PSK], [AES/WPA2-PSK], [TKIP/WPA-PSK], or [TKIP/
WPA2-PSK] is selected, enter a key of from 8 to 63 characters.
Camera could not find wireless LAN access point to which it could
connect using [Simple Connection] > [WPS Button]/ [WPS PIN];
check device and confirm that signal is not blocked and that the
access point is within distance of about 30 m (100 ft.).
Information required for connection to wireless LAN access point
is not available. Select any option other than [Off] for [Simple
Connection] and try again.
Refer to
P.141,
P.152
P.148
—
P.141
P.141
P.141,
P.142
P.148
P.142
P.153
P.153
20
185