Configuring A G800Se-Only Ftp/Auto Update Server - Ricoh G800 User Manual

Configuring a G800SE-Only FTP/Auto Update Server

If the computer is not currently configured as a server, the supplied
SR-10 software can be used to create an SR-10 ftp or auto update
server exclusively for use by this camera.
Caution ---------------------------------------------------------------------------------
Servers created using the supplied SR-10 software are for use only by this camera.
Other clients can not connect. SR-10 ftp servers are for upload only; images can
not be downloaded to the camera.
Note -------------------------------------------------------------------------------------
See P.177 for information on installing SR-10.
1
Launch SR-10.
• The [SR-10] window will be displayed.
2
Adjust settings.
• See page P.146 for more information.
3
Click [Apply].
• Click [Apply] to save changes.
14
145