Spirit CT850 Owner's Manual page 10

STEP 1: Uprights
1. The Right Upright (34) has a preinstalled Lower Computer Cable A (42). To install the uprights on the base
frame, special care must be taken not to pinch the computer cable between the upright and frame base. Slide
the Split Washer (117) and Flat Washer (116) on the Button Head Socket Bolt (144). Slide the bolt through
the top hole in the Retaining Plate (98), and corresponding top hole in the upright tube, and screw into the
base frame. Now install the other two Button Head Socket Bolt (144) together with Split Washers (117), and
Flat Washers (116) and tighten all three bolts up.
2. Repeat this step to install the Left Upright (33).
3. Attach the Left and Right plastic covers (26-L, 27-R) with four Phillips Head Screws (134).
HARDWARE
#116. 3/8" x 35 x 2T
Flat Washer
(6 pcs)
CT850
T readmill
#117. 3/8" x 16.5 x 2.0T #134. M5 x 12mm
Split Washer Phillips Head Screw
(6 pcs)
6
(4 pcs)
#144. 3/8" x 3"
Button Head Socket Bolt
(6 pcs)