Alarm Link To A Position/Tour; Other Operations - EverFocus EPTZ1000 User Manual

To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The system will
ask you to enter the tour number you would like to run, and starts the tour after
pressing Enter. To preset a tour before running it is necessary.
Note: The difference between the One-way tour mode and To-and-fro tour mode is that
the return modes are different. For example: There is a tour with 3 preset positions 1, 2
and 3. The camera runs 1 2 3 1 2 3 in the One-way tour mode, and 1 2 3 2 1 in
the To-and-fro tour mode.

4.5. Alarm Link to a Position/Tour

The Outdoor/Indoor Speed Dome has 4 alarm inputs that can be set to link to a position
or a tour when an alarm is triggered.
Set an alarm link:
Press F1 to set an alarm link. Enter the alarm number, and then press Enter .
Switch the Joystick up/down to select a position or a tour, enter a position or tour
number, and then press Enter to confirm the alarm link setting.
Delete an alarm link:
Press Clr + F1 to delete a link of alarm to position/tour.

4.6. Other operations

The Outdoor/Indoor Speed Dome can work with a DVR that has PTZ control
functions, and a matching protocol. The available control functions depend on
different DVRs.
The Outdoor/Indoor Speed Dome can work with a keyboard that has PTZ control
functions, and a matching protocol. The available control functions depend on
4-36