Height Of The Bottom Feed-Dog - Pfaff 1245 Instruction Manual

Adjustment
11.04.03

Height of the bottom feed-dog

11 - 4
Requirement
With the stitch length set at „0" , the bottom feed dog must protrude over the needle plate
as high as the teeth when at TDC.
1
Fig. 11 - 03
Set stitch length „0" .
Bring the bottom feed dog to its TDC by turning the handwheel.
Adjust feed dog carrier 1 (screws 2) in accordance with the requirement.
If required, the feed dog height can be reduced a little on machines without a
bottom feed lifting phase (without P).
2