Care and maintenance
Setting the machine upright
10.
Lubricating the hook
04
10 - 3
Turn the machine off!
Lubricate all bearings marked in Fig. 10.02 twice a week.
Open the bed slide to gain access to oiling point 1.
Pull the knee lever out to the front and lay the machine on its back.
Lubricate all bearings marked in Fig. 10.03 twice a week.
Hold the machine, press tilt safety device 3 (Fig. 10-04) and return the machine to an
upright position with both hands.
Danger of crushing between machine and table top!
3
Fig. 10 - 04
Pull the knee lever out to the front and
lay the machine on its back.
Fill oil reservoir 1 through hole 2 up till
the topmost marking.
Setting the machine upright
Hold the machine, press tilt safety
device 3 and return the machine to an
upright position with both hands.
1
2
Turn the machine off!
Danger of crushing between
machine and table top!