Table of Contents
Advertisement
RAS96 RASCard User Guide
Code
43
44
45
46–4D Reserved
4E
4F
50
51
52
53
60
61
62
63
B0
B1
E1–EF Setup Pages
FF
72
Name
Description
Detect and Initialize
Initialize any serial and parallel ports (also game port).
Serial and Parallel Ports
Reserved
Detect and Initialize
Initialize math coprocessor.
Math Coprocessor
Manufacturing POST
Reboot if Manufacturing POST Loop pin is set. Otherwise
Loop or Display
display any messages (i.e., any non-fatal errors that were
Messages
detected during POST) and enter Setup.
Security Check
Ask password security (optional).
Write CMOS
Write all CMOS values back to RAM and clear screen.
Pre-Boot Enable
Enable parity checker. Enable NMI. Enable cache before
boot.
Initialize Option ROMs
Initialize any option ROMs present from C8000h to EFFFFh.
Note: When FSCAN option is enabled, will initialize from
C8000h to F7FFFh.
Initialize Time Value
Initialize time value in 40h BIOS area.
Setup Virus Protect
Set up virus protect according to Setup
Set Boot Speed
Set system speed for boot
Setup NumLock
Set NumLock status according to Setup
Boot Attempt
Set low stack boot via INE19h.
Spurious
If interrupt occurs in protected mode.
Unclaimed NMI
If unmasked NMI occurs, display Press F1 to disable NMI,
F2 reboot.
E1, page 1; E2, page 2; etc.
Boot
CommPlete Communications Server
Advertisement
Table of Contents
