Arris SURFboard SBR-AC1900P User Manual page 47

2. Click Guest Network Settings from the Wireless submenu options.
3. Select the tab for the band whose settings you want to configure.
4. Select the guest network from the Selected Guest Network drop-down list.
5. Select Enabled or Disabled in the Guest Network field to turn ON or OFF the selected
wireless guest network.
6. Do one of the following to set the network name for your wireless network in the Network
Name (SSID) field:
•
Keep the default network name listed in the field.
•
Enter a different name for your guest network.
The wireless network name must be different from any other network name on your
home network. You can use any combination of letters (lowercase and uppercase),
numbers, and/or special characters (symbols); 32 characters maximum.
7. Select LAN or Guest from the IP Network drop-down list.
•
LAN – Configures the guest network to be part of your primary network and allow
guest users to connect to your primary network.
• Guest – Configures the guest network to only allow access to a specific network and
not your primary network.
8. Enter the IP address for the SBR-AC1900P on the Guest network in the IP Address field.
9. Enter the first IP address of the range of IP addresses for the guest network lease pool in
the Lease Pool Starting IP Address field. These are IP addresses that the SBR-AC1900P
assigns to devices on your guest network.
10. Enter the last IP address of the range of IP addresses for the guest network lease pool in
the Lease Pool Ending IP Address field.
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
Chapter 7: Managing Your Wi-Fi Router and Connected Networks
SURFboard SBR-AC1900P Wi-Fi Router User Guide
47