Indicator Lights For The Sbr-Ac1900P - Arris SURFboard SBR-AC1900P User Manual

Name
AC in
WPS/G.hn pairing
button
USB 3.0
USB 2.0
WAN
LAN (1 - 4)
Reset

Indicator Lights for the SBR-AC1900P

The Wi-Fi Router has several LED indicator lights on the rear panel to assist in troubleshooting:
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
Description
Connector for the power cord.
Begins associating the Wi-Fi Router with either a wireless device or a
G.hn device.
Press and hold the button for two to three seconds to initiate G.hn

pairing.
Press and hold the button for five to 10 seconds to initiate WPS

pairing.
Press and hold the button for 15 Seconds or more to unpair the

Wi-Fi Router from the G.hn network.
USB 3.0 host connector.
USB 2.0 host connector.
Connector for cabling to the Internet services modem.
Connectors for cabling to devices using Ethernet cables.
Can be used either to reset the Wi-Fi Router to its factory settings or to
restart the Wi-Fi Router. Use a pointed non-metallic object to press and
hold this button.
Press and hold this button for three to five seconds to restart the

Wi-Fi Router as if you power cycled the device.
Press and hold this button for more than 10 seconds if you want to

reset the Wi-Fi Router to its factory default settings and restart the
device. Any customized settings that you have set will be lost.
Chapter 3: Installing the Wi-Fi Router
SURFboard SBR-AC1900P Wi-Fi Router User Guide
17