Set Up A Guest Wireless Network - Arris SURFboard SBR-AC1900P User Manual

• Unencrypted: network security is not set for your wireless network. This allows access
to your wireless network without a Wi-Fi Security key.
•
WPA-PSK: combination Wi-Fi Protected Access with Pre-Shared Key and Wi-Fi
Protected Access with Pre-Shared Key.
•
WPA2 (Enterprise): Wi-Fi Protected Access version 2 provides additional network
security and requires a user name and password for network logon.
•
WPA2 + WPA (Enterprise): combination Wi-Fi Protected Access version 2 and Wi-Fi
Protected Access provides additional network security and requires a user name and
password for network logon.
8. Choose the Encryption type for your wireless network in the Encryption field:
•
AES – Advanced Encryption Standard: Provides the strongest encryption
(recommended).
• AES+TKIP – Advanced Encryption Standard and Temporal Key Integrity Protocol:
Allows both AES and TKIP-capable clients to connect to your wireless network.
9. Enter your wireless network password in the Passphrase field. You can use any
combination of letters, numbers, and/or special characters.
10. Click Apply.

Set Up a Guest Wireless Network

If you wish, you can set up your Wi-Fi Router to host a guest network. By doing so, you can
give your guests access to part of your wireless network, yet still keep certain parts private.
To set up a guest network:
1. Click Wireless on the SBR-AC1900P Main Menu.
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
Chapter 7: Managing Your Wi-Fi Router and Connected Networks
SURFboard SBR-AC1900P Wi-Fi Router User Guide
46