Manually Connect To Your Wireless Network; Use The Wps Button To Connect Your Wps-Enabled Wireless Device; Test Your Wireless Network Connection - Arris SURFboard SBR-AC1900P User Manual

Manually Connect to Your Wireless Network

You can user your Wi-Fi-enabled device to connect to the SBR-AC1900P by searching for the
network name assigned to your network. The default network name is listed on the security
label on the bottom of your Wi-Fi Router.
When prompted, enter your Wi-Fi Passcode to connect. The default passcode is listed on the
security label on the bottom of your Wi-Fi Router.
Use the WPS Button to Connect Your WPS-Enabled
Wireless Device
You can use the Wi-Fi Protected Setup (WPS) button on the Wi-Fi Router to connect your
WPS-enabled wireless devices. WPS automatically assigns a random wireless network name
(SSID) and Wi-Fi Security Key (password) to the SBR-AC1900P and other WPS-enabled wireless
devices to connect to your wireless network.
Note: To use the WPS Pairing button option, your computer hardware must support WPS and
also have WPA security compatibility.
1. Power ON the Wi-Fi Router and your other WPS-enabled wireless devices that you want to
connect to your wireless network.
2. Press and hold the WPS pairing button located on the back of the SBR-AC1900P for five to
10 seconds and then release. See
button.
3. If applicable, press the WPS button on your WPS-enabled computer or other WPS-enabled
wireless device.
4. Repeat step 3 for each additional WPS-enabled wireless device that you want to connect
to your wireless network.

Test Your Wireless Network Connection

Perform the following connectivity test to confirm that your wireless connection is working on
the SBR-AC1900P and your computer:
1. Disconnect the Ethernet cable, if connected, from the SBR-AC1900P and your computer.
2. Check that the Wireless LED on the SBR-AC1900P front panel is lit solid green.
3. Open a web browser on your computer, such as Internet Explorer, Google Chrome,
Firefox, or Safari.
4. Type a valid URL (such as http://www.surfboard.com) in the address bar, and press Enter.
If the website failed to open, please contact your service provider or call ARRIS Technical
Support at 1-877-466-8646 for assistance.
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
Chapter 5: Setting Up a Wireless Network Connection
Rear Panel
(page 16) for the location of the pairing
SURFboard SBR-AC1900P Wi-Fi Router User Guide
30