Test Your Connection; Set Up Dhcp - Arris SURFboard SBR-AC1900P User Manual

3. Click the Refresh button (F5) in your web browser to reload the information on the screen.

Test Your Connection

The Status Diagnostics screen lets you perform a series of tests to make sure that your
SBR-AC1900P is connected and displays information about the ping test parameters.
To run a ping test:
1. Click Status on the SBR-AC1900P Main Menu.
2. Click Diagnostics from the Status submenu options.
3. In the Select Utility section, select the kind of test that you want to run.
4. In the Ping Test Parameters section, set the parameters that you would like to use for your
test.
5. Click Start Test to begin the test. The results will appear in the box at the bottom of the
screen.

Set Up DHCP

The Basic DHCP screen lets you manually assign IP addresses to devices on your LAN.
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
Chapter 7: Managing Your Wi-Fi Router and Connected Networks
SURFboard SBR-AC1900P Wi-Fi Router User Guide
41