Unpairing Your Sbr-Ac1900P - Arris SURFboard SBR-AC1900P User Manual

4. Click Login to open the SBR-AC1900P Web Manager. The SBR-AC1900P Main Screen
appears.
5. Click Advanced on the SBR-AC1900P Main Menu, and click RipCurrent (G.hn) from the
Advanced submenu options.
6. In the Domain Name field, enter the domain name that you want to assign to your
network.
7. In the Pairing password field, enter the pairing password that you want to assign to your
network.
8. Click Apply.
9. Plug the network extender into an electrical outlet near the SBR-AC1900P.
10. You must manually enter the same domain name and password into any new extenders
that were added to your RipCurrent network in order to create a secure connection. The
pairing process begins. Once the pairing process is complete, both LEDs stop flashing and
become solid green. It may take up to 60 seconds for the pairing process to complete.
11. Use an Ethernet cable to connect the network extender to its client device.

Unpairing Your SBR-AC1900P

Follow these steps if you need to unpair the SBR-AC1900P from the network extender.
Note: You must use the default user name and password (listed below) to log in to the
SBR-AC1900P Web Manager for the first time. For network security purposes, we highly
recommend that you change the default user name and password after logging onto the
SBR-AC1900P for the first time. See
for more information.
1. Open any web browser on the computer connected to the SBR-AC1900P.
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
Chapter 6: Adding G.hn Extenders To Your Network
Change the Default User Name and Password
SURFboard SBR-AC1900P Wi-Fi Router User Guide
(page 53)
34