Setting Up A Wireless Network Connection; Launch The Sbr-Ac1900P Quick Start Wizard - Arris SURFboard SBR-AC1900P User Manual

Setting Up a Wireless Network Connection

It is highly recommended that you first verify that your computer can connect to the Internet
using an Ethernet connection before configuring your wireless network.
You must currently have access to an Internet service in your home before you can set up a
wireless network connection. Also, make sure your computer and the SBR-AC1900P are
connected through an Ethernet connection.
Choose one of the following options to set up your wireless network connection:

Launch the SBR-AC1900P Quick Start Wizard


Manually Connect to Your Wireless Network

Use the WPS Button to Connect Your WPS-Enabled Wireless Device

After setting up a wireless connection on your home network, check that your wireless
network connection was set up properly. See
30) for more information.
Launch the SBR-AC1900P Quick Start Wizard
The SBR-AC1900P Quick Start Wizard helps you to quickly configure your basic wireless
network settings. Depending on your home network setup, you can further customize your
wireless home network configuration after completing the wizard.
1. Open a web browser (Internet Explorer, Google Chrome, Firefox, or Safari) on the
computer connected to the SBR-AC1900P.
2. Type the default LAN IP address http://mysurfboard.local in the Address bar and then
press Enter. The Login screen appears.
3. Type the default username and password. Both entries are case-sensitive.
Username: admin
Password: password
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
(page 26).
(page 30).
Test Your Wireless Network Connection
SURFboard SBR-AC1900P Wi-Fi Router User Guide
Chapter 5
(page 30).
(page
26