Setting Up An Internet Connection; Configure Your Ip Address - Arris SURFboard SBR-AC1900P User Manual

Setting up an Internet Connection

Important: Your computer may already be configured to automatically access the Internet. If
so, do not change the network options on your computer. Please contact ARRIS Technical
Support for assistance or verification.
If you cannot access the Internet after installing the Wi-Fi Router, you may have to manually
set up your computer to connect to the Internet. To do this, you will have to enable the
network options on your computer to automatically obtain an IP address and DNS server
address. After configuring the network options, you should verify the IP address.
If you still cannot access the Internet after configuring the IP address, contact ARRIS Technical
Support for assistance.
Please note, operating system-specific commands for configuring computer network options
are not provided in this document. The same general steps provided below apply to the
following Microsoft Windows operating systems:
Windows 10.

Windows 8.

Windows 7.

Note: For Mac, UNIX, and Linux computers, please follow the instructions provided in the
applicable user documentation.
If you are unfamiliar with the network configuration commands for your operating system or
need assistance, we highly recommend that you refer to the user documentation for the
operating system running on your computer for more information.

Configure Your IP Address

Note: The following instructions apply to Windows 7. Some windows and commands used in
this procedure may differ slightly from your computer, depending on your operating system.
1. Click the Start button and use the Search box to search for network and sharing.
2. Select Network and Sharing Center.
3. Click Change adapter settings from the Control Panel Home pane to open the Network
Connections window.
STANDARD PN 365-095-28244 x.1
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
SURFboard SBR-AC1900P Wi-Fi Router User Guide
Chapter 4
23